E8X / E9X Drift Angle Kit

E8X/E9X Drift angle kit features : Up to 70 degrees of steering angle High strength steel control arms and knuckle adapters Wider stance to achieve necessary clearance Roll center correction Bump steer correction Optimal Ackermann for drifting (4 positions) Adjustable steering stoppers Excellent steering steering control/feedback Quality bearings are used to ensure long lifetime Easily adjustable caster (5 to 6.5 degree) *wider range is possible by adjusting lower control arm bearings This kit has everything you need to install : 2x Lower control arms 2x Knuckle adapters 2x Outer tie rods 2x Top hats 4x Ackermann shims All bearings and hardware necessary for installation Installation/setup instruction Coilovers are suggested to run with this kit.  To install this kit you will need : Modify stock knuckle to bolt-on knuckle adapter (lower portion has to be cut off, cut line provided in instructions. Suggested method : bandsaw, but it is also possible to do with angle grinder) Depending on wheel setup and caster setting, chassis seam behind the wheels (inner wheel well) might require to be flattened for clearance Stock inner tie rods Stock brakes Front sway bar will have to be removed Minimum wheel size R17 Wider front fenders or overfenders *suggested Coilovers *suggested Qualified mechanic Racing use only